Horn Switch Stater
still having starting troubles! help please?
My 1997 Ford explorer wont start, new starter, new solenoid, now the dash lights wont work. Any advice?
Also I am not getting any spark to the Plug wires. When I jump the solenoid the stater fires and the motor turns over but no spark. Is there anywhere else I should be looking to trace this poblem?
Now with a new solenoid changed there is no power anywher in the truck, no lights no horn no nothing. Do you still think Ignition switch, if so how can I make sure before I spend more $.
Thanks
Check all battery terminals for one to make sure you are getting a good connection.. I've found if the terminals have been changed with the $2 bolt together clamps, the clamps come loose and first thing knocked out is starting ability.
Secondly, as someone stated above, make sure you have all wires to the starter solenoid on the side firewall right. These vehicles have two starter solenoids, one on the starter itself and one on the side fire wall....
The side firewall solenoid has many wires that get power to power many things including the battery cable that runs from the fuse box on the drivers side to the battery ... the wires are connected off of the battery to starter solenoid post of the starter solenoid. (don't feel bad, I goofed up once like that too)
the thing after that would require a cheap test light to diagnose.. as I'd need to know where you aren't getting voltage first.....
Try all key positions and see what lights up and what does n't... Usually on a Ford, when the ignition switch goes (on this one it's below the steering column) it usually burns the ignition switch connector and requires removal of the connector to switch to find the burn on the connector
Horn Switch Stater
 |
No items matching your keywords were found.
|
|
Pyle PWD501 LCD Two-Way Remote Start/Security System $124.61 One 5-Button 2-way Remote Transmitter with LCD Display One 4-Button 1-way Remote Transmitter 2-way Transmitter Confirmation w/ LCD Display,Piezo Chime, and Vibrate Features Backlit LCD Display Extended Range Transceiver 7 Built-in Relays for Start, Ignition 1, Ignition 2,Accessory, Flashing Parking Lights, and Door Locks External Relay and Harness for Starter Defeat w/Anti-grind Built-in El... |
|
|
PYLE PWD250 LCD 2-way Security System $97.64 One 5-Button 2-way Remote Transmitter with LCD Display One 4-Button 1-way Remote Transmitter 2-way Transmitter Confirmation w/ LCD Display, PiezoChime, and Vibrate Features Backlit LCD Display Extended Range Transceiver 3 Built-in Relays for Parking Lights, and Door Locks External Relay and Plug-in Harness for Starter Defeat Electronic Dual Stage Shock Sensor Dual Stage Optional Sensor Por... |
More Results:_____________________________________________
