Braided Hydraulic Clutch

Braided Hydraulic Clutch
What size is my clutch line for my Civic?

Ok...what I have going on is I need a new clutch line from my slave cylinder to the black rubber hose. I want to put a braided steel line in its place. No one can tell me the size of the hose I need and the people at my local speed shop only care about how high they can jack there trucks. Please help this lone honda man. Its a 92 honda civic si HB with a 96 ZC motor and trans swap and If there is any confusion it is a hydraulic clutch.
It's not a dress kit. It is a actual poly lined hose.
To hondab16tuner.....There is a Japanese equivalent for every American motor. And what is the Japanese equivalent for a d16y8?...The ZC.

Also, there is a sz. -3 or -4 for clutch lines a tape measure isn't going to tell me the difference b/w the two.

Remove the old line.
Remove the fittings from each end.(high compression style)
Measure with a caliper the outside diameter.
Replace compression fittings with new ones.

As long as the fittings at each end are the same size and fit the new line the diameter of the line is irrelevant. The line is designed to move fluid once it is free of air.

This does not sound too complicated and yes, finding exact specs can sometimes be a pain.